Trdat graphics

 *TRDAT (vsn: June 1995) TOP NODE.  TOKAMAK:  JET 
 *OPTIONS:
  1 -- PLOT TIMESERIES SHOT DATA F(T)
  2 -- PLOT PROFILE SHOT DATA F(X,T)
  B -- PLOT/DISPLAY BEAM DATA
  C -- PLOT/DISPLAY TF RIPPLE DATA
  I -- PLOT/DISPLAY ICRF DATA
  L -- PLOT/DISPLAY Lower Hybrid DATA
  M -- (RUNS WITH NON-CIRCULAR BDY) PLOT MOMENTS BDY EVOLUTION
  N -- (RUNS WITH FREE BDY, MODE 2) PLOT MAGNETICS DATA
  O -- PLOT PLASMA BDY WITH LIMITERS & WALLS
  S -- DISPLAY SCALAR DATA
  R -- RESTART TRDAT, READ DATA FOR A DIFFERENT RUN ID
  T -- TEST MAPPING OF PROFILE DATA
  W -- WRITE UNIFIED PHYSICS FILE (xxxxPH.DAT)
  Q -- QUIT -- EXIT PROGRAM
 TRDAT TOP NODE >> ENTER OPTION CODE:
 [fgetline:  no command line editing available]
2

 PROFILE FCN VS. TIME PLOT CONTROL NODE:
 ... DEFAULT IS TO PLOT DATA STORED TIME CONTIGUOUS;
 ENTER NEGATIVE FCN NUMBER TO PLOT WITH AXES REVERSED:

   1.  (BOL) Power radiated            2.  (NER) electron density    
   3.  (OMG) plasma rotation           4.  (TER) electron temperature
   5.  (TI2) ion temperature           6.  (ZF2) Zeff profile        
 DGRAF2:  ENTER FCN NUMBER OR "Q" TO QUIT:
4

   FUNCTION:  electron temperature (TER)
  SOURCE ID:  JET  40365
      TITLE:  RUN 40365B37   TRDAT INTERPOLATED DATA PLOT

 GRAPHICS OPTIONS:
   (1) 3-D GRAPH OF FUNCTION VS. time AND x = (R-R0)/a
   (2) 2-D GRAPH VS. time AT FIXED x = (R-R0)/a
   (3) 2-D GRAPH VS. x = (R-R0)/a AT FIXED time
   (4)  (OR "Q")  QUIT GRAPHICS
   (5) CONTOUR PLOT; FOR "FAST" PLOT ENTER "5F"
   (6) CHANGE DEFAULT PLOT TYPE FOR 2D PLOTS
   (7) CHANGE SCALING DEFAULTS FOR 2D PLOTS
   (8) time OR x = (R-R0)/a - SLICE MULTIPLOT
 >ENTER CHOICE NUMBER BETWEEN 1 AND 8<
 GRF3SG:  ENTER OPTION #:
1
 SET AXIS TYPES FOR 3D ISOMETRIC PLOT (ONLY):
  X AXIS - INDEP VAR. "time" LOG = F (T/F)
  Y AXIS - INDEP VAR. "x = (R-R0)/a" LOG = F
  Z AXIS - FUNCTION "electron temperature (TER)" LOG = F
 OPTIONS:
  C - CHANGE MISCELLANEOUS PLOT CONTROLS
  M - MODIFY (X,Y,Z) DOMAIN TO BE PLOTTED OVER
  S - SET SKIP COUNT ON DRAWING LINES OF CONST. X, Y
  X - CHANGE X AXIS TYPE (TOGGLE LOG/LINEAR)
  Y - CHANGE Y AXIS TYPE
  Z - CHANGE Z AXIS TYPE
  D - ESTABLISH CURRENT AXIS TYPES AS PERMANENT DEFAULT
  P - PROCEED TO MAKE PLOT
  N or Q - QUIT (RETURN TO GRAPHICS OPTIONS NODE)
  R - QUIT (EXIT GRAPHICS SUBROUTINE)

GRF3SG:  SELECT 3D ISOMETRIC AXIS OPTION (X/Y/Z/D/P):
p
 [ GFLIB/SGLIB -- output to plot screen or file ]

Plotting with TRDAT

Trdat plot